Filter
Top Products
Chapter 7 Menu Displays and Detailed Settings
132
7-3 Adjustments and Settings From Menus
2
Turn the MENU knob to move the b mark to
“OPERATION”, then press the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to POWER SAVE, then
press the MENU knob.
If a different page is displayed, turn the MENU knob
until the POWER SAVE page appears, then press the
MENU knob.
The POWER SAVE page appears. The current
settings appear on the right side of each item.
4
Move the b mark to “i.LINK OUT”, then press the
MENU knob.
The b mark changes to a z mark, and the z mark
changes to a ? mark.
5
Turn the MENU knob to select “ENABL”, then press
the MENU knob.
The setting is confirmed. The z mark changes to a b
mark and the ? mark changes to a z mark.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF.
7-3-3 Setting the Color Temperature
Manually
You can adjust the value of the white balance manually by
setting the color temperature.
Proceed as follows.
1
Holding down the MENU knob, move the MENU ON/
OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move the b mark to
“PAINT”, and press the MENU knob.
If this is the first time the PAINT menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to “WHITE”, and press the
MENU knob to display the WHITE page.
If a different page is displayed, turn the MENU knob
until the WHITE page appears, and press the MENU
knob to select the page.
The above table shows the adjustment of the white
balance of channel A.
Items followed by “<B>” are used to adjust the white
balance of channel B.
4
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
5
Turn the MENU knob to change the setting, and press
the MENU knob.
Item Setting
i.LINK OUT Enable or disable i.LINK (AV/C) OUT.
REC AUDIO OUT Select whether to output E-E signals
or no audio from the AUDIO OUT
connector during recording.
NETWORK/
THUMB
Select whether to permanently enable
the CBK-NC01 (option) and thumbnail
display, or to disable them in power
saving mode.
04 POWER SAVE
i.LINK OUT : DSABL
REC AUDIO OUT : EE
NETWORK/THUMB : SAVE
TOP
Item Description
COLOR TEMP
<A>
Sets the color temperature for the
desired value. Adjust the value while
looking at the real image because error
tends to be bigger for adjustment of
high color temperature.
COLOR FINE <A> Adjusts the value more precisely when
the color temperature adjustment
through COLOR TEMP is not
satisfactory.
R GAIN <A> Only the value of R GAIN is changed.
B GAIN <A> Only the value of B GAIN is changed.
D5600K Sets the color temperature to
approximately 5600 K.
P02 WHITE
COLOR TEMP <A>: 3200
COLOR FINE <A>: 0
R GAIN <A>: 0
B GAIN <A>: 0
D5600K <A>: OFF
COLOR TEMP <B>: 3200
COLOR FINE <B>: 0
R GAIN <B>: 0
B GAIN <B>: 0
D5600K : OFF