Filter
Top Products
Chapter 3 Recording and Playback
64
3-3 Checking Recording and Playback
3
Press the SEL/SET dial or the MENU knob.
Thumbnails of the frames including the selected
essence mark appear.
4
Turn the SEL/SET dial or the MENU knob to select
the desired frame.
You can also select frames with the following
operations.
Press the PREV or NEXT button: Select the
previous or next frame.
Press the PREV or NEXT button with the F REV
or F FWD button held down: Select the first or
last frame.
5
Press the SEL/SET dial or the MENU knob to cue up
the selected clip.
To start playback from the selected frame, press the
PLAY/PAUSE button.
3-3-5 Clip List Playback
You can play back clips in the order of clip lists created
with the scene selection function (see page 70).
Playing back in clip list order
Proceed as follows.
1
If the clip list that you want to play exists on the disc,
load it into the current clip list (see page 72).
For the clip list loading operation, see 4-3-1 “Loading
a Clip List From Disc Into Unit Memory” (page 78).
2
Press the SUB CLIP button, turning it on.
3
Press the PLAY/PAUSE button.
Playback begins from the first sub clip in the current
clip list.
Note
Depending on the length of sub clips in the clip list and
their arrangement on the disc, playback may freeze
momentarily between sub clips.
Cuing up with sub clip thumbnails
With the desired clip list loaded in the current clip list,
proceed as follows.
1
Press the SUB CLIP button and the THUMBNAIL
button, turning on the indicators.
Thumbnails of the first frames in the sub clips appear.
Notes
• If the MENU ON/OFF switch is set to ON, set it to
OFF and press the THUMBNAIL button.
• If you set the MENU ON/OFF to ON during
thumbnail display, thumbnail display is cancelled
and replaced with menu display.
This indicates that the thumbnail
images are the frames including
the essence mark
(SHOTMARK1).
Sixth frame is selected
from a total of 31
SHOTMARK1 frames.
Recording date and time
of selected frame
Currently selected
SHOTMARK1 frame
(The example shows the case where SHOTMARK1 is selected
as the essence mark.)