Filter
Top Products
Chapter 4 Scene Selection
79
4-3 Managing Clip Lists (CLIP Menu)
• If you set the MENU ON/OFF to ON during thumbnail
display, thumbnail display is cancelled and replaced
with menu display.
• Unless the current clip list has been saved to disc, its
contents will be lost when you load a new clip list from
the disc.
4-3-2 Deleting Clip Lists From a
Disc
Proceed as follows.
1
Display the CLIP menu.
See “Displaying the CLIP menu” (page 78).
2
Select DELETE in the CLIP menu, and press the SEL/
SET dial or the MENU knob.
A clip list appears.
The date of creation or the title is displayed for each
clip list. The date of creation is always displayed for
clip lists without titles.
To switch between display of dates of
creation, titles, and clip list names
With the SHIFT button held down, press the SET
button.
With each press, the display changes as follows.
Dates of creation > titles > clip list names > dates of
creation …
3
Select the name of the clip list to delete and press the
SEL/SET dial or the MENU knob.
The message “DELETE OK? YES b NO” appears.
4
Turn the SEL/SET dial or the MENU knob to move the
b mark to “YES” and press the dial/knob.
The selected clip list is deleted from the disc.
5
Hold down the SHIFT button and press the SUB CLIP
button.
CLIP menu operations end.
4-3-3 Clearing the Current Clip List
From the Unit Memory
Proceed as follows to clear the current clip list, leaving it
with no clip list loaded.
1
Display the CLIP menu.
See “Displaying the CLIP menu” (page 78).
2
Select CLEAR in the CLIP menu, and press the SEL/
SET dial or the MENU knob.
The following screen display appears.
3
Press the SEL/SET dial or the Menu knob.
The message “EXECUTE OK? YES b NO” appears.
4
Turn the SEL/SET dial or the MENU knob to move the
b mark to “YES” and press the dial/knob.
The current clip list is cleared, leaving it with no clip
list loaded.
5
Hold down the SHIFT button and press the SUB CLIP
button.
CLIP menu operations end.
4-3-4 Setting the Start Time Code of
the Current Clip List
The start time code (LTC) of the current clip list is set to
00:00:00:00 when the camcorder is powered on and when
a disc is inserted.
You can set the start time code to any value. Proceed as
follows.
1
Load an existing clip list for which you want to set the
initial time code into to the unit memory as the current
clip list.
For details, see 4-3-1 “Loading a Clip List From Disc
Into Unit Memory” (page 78).
2
Display the CLIP menu.
See “Displaying the CLIP menu” (page 78).
3
Select TC PRESET in the CLIP menu, and press the
SEL/SET dial or the MENU knob.
The following screen display appears.
CLEAR CLIP LIST ESC
CLEAR CLIP LIST : EXEC