Filter
Top Products
Chapter 3 Recording and Playback
57
3-2 Recording
To check clip names
Press the THUMBNAIL button to display the thumbnail
screen, and select the clip whose name you want to check.
The name of the selected clip appears in the upper left of
the screen.
See “Cuing up with sub clip thumbnails” (page 64) for
more information about the thumbnail screen
Notes
• The item at the upper left of the screen is displayed
according to the following order of priority.
Title > User-defined clip name > Standard format clip
name
Therefore, the display of this item changes as following,
depending on whether there is a title.
When a title has been set as a clip name on this unit, for
clips recorded on this unit, the title is displayed.
The user-defined name or standard format name is
displayed for clips without a title.
• If the firmware of your XDCAM device is version 1.4x
or lower, clips with user-defined names appear as
“C5000” to “C9999”, in order of recording.
To check clip information (name, title, etc.) in the
CLIP STATUS menu
1
Holding down the MENU knob, move the MENU ON/
OFF switch from OFF to ON.
The TOP menu appears.
2
Turn the MENU knob to select “DIAGNOSIS”, and
press the MENU knob.
If this is the first time the DIAGNOSIS menu has been
displayed, the CONTENTS page of the DIAGNOSIS
menu appears. If the menu has been used before, the
last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to “CLIP STATUS”, and
press the MENU knob.
If a different page is displayed, turn the MENU knob
to scroll the screen to “CLIP STATUS”, and then press
the MENU knob.
The CLIP STATUS page appears. The current settings
of the items on the page appear to the right of the
items.
3-2-10 Recording in Live Logging
Mode
1)
1) This is supported from firmware version 1.4 and PDZ-1 version 1.4.
Live logging is a function that allows you to
simultaneously transfer logging data as you record live
material.
You can install the optional CBK-NC01 Network Adaptor
in the camcorder, and connect to the adaptor’s network
connector from the PDZ-1 Proxy Browsing Software to do
the following.
• View proxy AV data.
• Add and modify metadata (titles, comments, essence
marks, etc.).
• Create clip lists.
After adding or modifying metadata and clip lists, you can
transfer them from the computer back to the camcorder for
recording on the original disc.
Refer to the PDZ-1 help for more information about PDZ-
1 functions and operations.
To record in live logging mode
With the optional CBK-NC01 network adaptor installed
on the camcorder, proceed as follows.
1
Use an Ethernet cable to connect the camcorder to a
computer with PDZ-1 installed.
2
In the TOP menu, select “OPERATION”.
Fuji.MXF
Sakura.SMI
User-defined clip names can be used by FAM and FTP
User-defined clip list names can be used by FAM and FTP
CLIP NO : 001/010
TITLE: (no name)
RECORD DEVICE: PDW-530
SERIAL: 10001
DATE : 08/01/06
TIME : 19:54:38
D08 CLIP STATUS TOP
NAME : C0001