Filter
Top Products
Chapter 7 Menu Displays and Detailed Settings
140
7-3 Adjustments and Settings From Menus
Globally unique ID is automatically recorded every
shooting.
The Extended UMID is metadata that provides additional
information such as location, time/date, company and so
on.
The UMID is applied as follows.
Using the Extended UMID
You have to enter a country code, organization code and
user code. Set the country code referring to the ISO-3166
table, and set the organization code and user code
independently.
For details, see “UMID Menu Setup” on page 140.
Functions of UMID data
The UMID data enables the followings:
• Add a globally unique ID to every shot of audio-visual
material. The unique ID is used to detect the material
source and to link it with the original source material.
• Distinguishing between original material and copied
material. 00 is added to the Instance Number for original
material.
• Recording based on the UTC. The UTC is used when
recording the UMID. This enables uniform control of
source material recorded all over the world based on the
universal time code.
• Calculating the date difference among source materials.
The source material is recorded based on the MJD
(Modified Julian Date), which enables easy calculation
of date difference among source materials.
UMID Menu Setup
The UMID SET page of the OPERATION menu allows
you to make settings for UMID data.
Proceed as follows.
1
Holding down the MENU knob, set the MENU ON/
OFF switch from OFF to ON.
The TOP menu appears.
2
Turn the MENU knob to move the b mark to
“OPERATION”, and press the MENU knob.
If this is the first time the Operation menu has been
displayed, the CONTENTS page appears.
If the menu has been used before, the last accessed
page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to “UMID SET”, and press
the MENU knob.
If a different page is displayed, turn the MENU knob
until the UMID SET page appears, then press the
MENU knob.
The UMID SET page appears.
The current settings appear on the right side of each
item.
Proceed as follows.
4
Turn the MENU knob to move the b mark to the item
you want to set, and press the MENU knob.
The b mark to the left of the selected item changes to
a z mark and the z mark to the left of the setting
changes to a ? mark.
Instance No.
Material No.
ID generated when shooting
Same as the above
Source Pack
Shooting information (when,
where and who)
Same as the above
M
Distinguishing between the
original material and copied
material
M
Material source ID/detecting
material
M
Metadata pack that identifies
the source of material unit by
defining the when, where
and who of the material unit
with which it is associated.
Original material: 00 00 00
Copied material: generation number
(1 byte) + random number (2 byte)
Item Contents
COUNTRY CODE Sets the country code.
ORGANIZATION Sets the organization code.
USER CODE Sets the user code.
TIME ZONE Sets the time difference from UTC.
?22 UMID SET
COUNTRY CODE :
ssss
ORGANIZATION CODE:
ssss
USER CODE :
ssss
TIME ZONE 00:+00:00
TOP