Filter
Top Products
Chapter 3 Recording and Playback
59
3-2 Recording
next section “To copy proxy data for all clips on the disc
to a memory card”, and copy the data that could not be
recorded.
• It is not possible to record only proxy data to a memory
card without recording to the disc.
To stop recording
Recording to memory cards stops when recording to the
disc stops.
You do not need to take any special steps to stop recording
to memory cards.
To delete recorded proxy data
To delete material recorded on a disc and proxy data
recorded on a memory card at the same time, execute
DELETE LAST CLIP, DELETE ALL CLIPS, or QUICK
FORMAT on the DISC page of the MAINTENANCE
menu (see page 201).
To delete only proxy data on a memory card, carry out the
steps in “To delete all proxy data in a memory card”
(page 59).
To copy proxy data for selected clips on
the disc to a memory card
To select clips on the disc and copy proxy data to a
memory card, one clip at a time, proceed as follows.
1
Insert a memory card into the PC card slot.
2
Search for the video of the clip that you want to copy.
(The camcorder can be either playing or stopped.)
3
In the TOP menu, select “OPERATION”.
4
Turn the MENU knob to scroll to the MEMORY REC
page. Alternatively, select “MEMORY REC” on the
CONTENTS page.
The MEMORY REC page appears.
5
Select “COPY CURRENT CLP” with the MENU
knob and then press the MENU knob.
The message “EXECUTE OK?” appears.
6
Select YES to execute the copy.
Proxy data for the playing or stopped clip is copied to
the memory card.
During the copy, the message “MEMORY ACCESS
**%” (where ** is a progress percentage number from
0 to 99) appears in the viewfinder and color LCD.
To copy proxy data for all clips on the disc
to a memory card
To copy proxy data to a memory card for all clips on the
disc, proceed as follows..
1
Insert a memory card into the PC card slot.
2
Insert the disc that you want to copy into the
camcorder.
3
On the MEMORY REC page of the OPERATION
menu (see page 59), select “COPY ALL CLIPS” and
then press the MENU knob.
The message “EXECUTE OK?” appears.
4
Select YES to execute the copy.
Proxy data for all clip on the disc is copied to the
memory card.
During the copy, the message “MEMORY ACCESS
**%” (where ** is a progress percentage number from
0 to 99) appears in the viewfinder and color LCD.
Notes
• No DV stream is output from the camcorder’s i.LINK
DV IN/OUT S400 connector while proxy data is being
copied from a disc to a memory card.
• The message “MEMORY CARD ERROR!” appears if a
copy is attempted while the unusable memory symbol
(see page 60) is visible in the viewfinder.
When there is not enough free memory
The message “M. shortage” appears when the amount to
data to copy is greater than the amount of remaining
memory, and the message “MEMORY CARD FULL!”
appears when there is no remaining memory. The copy
cannot be executed if either of these messages appears.
Insert another memory card.
To cancel a copy to a memory card
Proceed as follows.
1
On the MEMORY REC page of the OPERATION
menu (see page 59), select “ABORT COPY”.
The message “EXECUTE OK?” appears.
2
Select YES to cancel the copy.
The copy is cancelled.
To delete all proxy data in a memory card
Proceed as follows.
COPY CURRENT CLP : EXEC
COPY ALL CLIPS : EXEC
ABORT COPY : EXEC
DEL ALL MEM CLP : EXEC
FORMAT MEMORY : EXEC
24 MEMORY REC TOP