Filter
Top Products
Setup Menu List
121
Menu Configuration and Detailed Settings
LENS FILE Menu
LENS FILE
Menu items Subitems and setting values Contents
Information
Displaying the
information for the
attached lens
(serial lenses only)
Lens Name The model name of the lens is displayed.
Manufacturer The manufacturer of the lens is displayed.
Serial Number The serial number of the lens is displayed.
Version The version of the lens is displayed.
Operation
Operating lens
files
Display Mode
Date&Time / Model Name /
Lens Name
Set the mode of the display for lens file selection.
Date&Time: To display the date and time when the lens files
have been stored.
Model Name: To display the name of the device with which
the lens files have been stored.
Lens Name: To display the name of the lens.
Recall Memory
Execute/Cancel
Select “Execute” to retrieve a lens file from the built-in
memory.
Store Memory
Execute/Cancel
Select “Execute” to store a lens file in the built-in memory.
Recall SxS
Execute/Cancel
Select “Execute” to retrieve a lens file from an SxS memory
card.
Store SxS
Execute/Cancel
Select “Execute” to store a lens file in an SxS memory card.
File Name
No Offset
Set the filename (max. 16 characters) of the lens file being
selected. Turn the jog dial to select a character then push the
dial to proceed.
Selectable characters: a to z (lower case), A to Z (upper case),
0 to 9, space, and the following characters:
!#$%&’()*+,-./:;<=>@[¥]~
File Source The file number of the file being selected is displayed.
Auto Recall
Off / On (Lens Name) / On
(Serial Number)
Specify whether to automatically retrieve the lens file for the
mounted lens
that supports serial communication.
Off: To not use
On (Lens Name): To retrieve the lens file corresponding to the
model name of the lens and reflect the contents of the file.
On (Serial Number): To retrieve the lens file corresponding to
the model name and serial number of the lens and reflect
the contents of the file. (If the lens does not support serial
number communication, the file corresponding with the
model name is retrieved.)