Filter
Top Products
Handling SxS Memory Cards
35
Preparations
Note
Do not operate the write-protect switch of an SxS
memory card while it is set in the camcorder.
Temporarily remove the card from the camcorder
before changing the switch setting.
Inserting an SxS memory card
1 Open the cover.
2 Insert the SxS memory card into the
slot.
The access lamp lights in red then changes to
green once the memory card is ready for use.
3 Close the cover.
Status indications by the access lamps
Card slots A and B are accompanied by the
respective access lamps to indicate their statuses.
Removing an SxS memory card
1 Open the cover, once press the eject
button to release the lock, then pull the
button out.
Inserting/Removing an SxS
Memory Card
Write-protect switch
SLOT SELECT
ON OFF
AB
SLOT SELECT button
Card slots
Access lamps
Eject buttons
Cover
Lamp Slot statuses
Lights in
red
Accessing the loaded SxS memory card
(writing/reading data)
Lights in
green
Standby (ready for recording or
playback using the loaded SxS memory
card)
Off • No SxS memory card is loaded.
• The loaded card is invalid.
• An SxS memory card is loaded, but
another slot is active.
MENU
SEL/SET
CAN
O
N
S
L
O
T
S
E
L
E
C
T
O
FF
PICTURE P
A
B
D
C
IN
With the label facing right
MENU
SEL/SET
CAN
O
N
S
L
O
T
S
E
L
E
C
T
O
FF
PICTURE P
A
B
D
C
IN
Press and unlock the button.