Filter
Top Products
Setup Menu List
123
Menu Configuration and Detailed Settings
OTHERS Menu
OTHERS
Menu items Subitems and setting values Contents
All Reset
Resetting to the
factory status
Execute/Cancel Select “Execute” to reset the camcorder to the factory status.
Camera Data
Storing/recalling
the menu settings
Store
Execute/Cancel
Select “Execute” to store the setting values in an SxS memory
card.
Recall
Execute/Cancel
Select “Execute” to retrieve the setting values from an SxS
memory card.
LUT Memory
Storing/recalling
user LUT data
Store
Execute/Cancel
Select “Execute” to store five user LUT data on an SxS
memory card collectively.
Recall
Execute/Cancel
Select “Execute” to recall five user LUT data from an SxS
memory card collectively.
3D-Link Mode
Setting the 3D-
Link mode
Note
3D-Link Mode
does not operate at
present.
Off / Main(L) / Sub(R) Set the 3D-Link operation mode.
Off: 3D-Link is not used.
Main (L): To control the sub unit (for left).
Sub (R): To be controlled by the main unit (for right).
ND
Adjustment
Setting the
sensitivity of ND
filter
Note
ND Adjustment
does not operate at
present.
ND Clear
0 to 999
Adjust the user adjustment value when the ND filter is set to
“Clear.”
ND 1(1/8)
0 to 999
Adjust the user adjustment value when the ND filter is set to
“ND 1 (1/8).”
ND 2(1/64)
0 to 999
Adjust the user adjustment value when the ND filter is set to
“ND 2 (1/64).”
Time Zone
Setting the time
difference
UTC –12:00 to +14:00
(UTC)
Set the time-zone difference from UTC in steps of 30
minutes.
Clock Set
Setting the built-in
clock
Date/Time Set the current time and date.
12H/24H
12H / 24H
Select the display mode of time.
12H: 12-hour mode
24H: 24-hour mode
Date Mode
YYMMDD / MMDDYY /
DDMMYY
Select the display mode of the date.
YYMMDD: In sequence of year, month, day
MMDDYY: In sequence of month, day, year
DDMMYY: In sequence of day, month, year
Language
Selecting the
language for
menus and
messages
English / Chinese / Japanese English: To display in English
Chinese: To display in Chinese
Japanese: To display in Japanese
Note
“Japanese” is effective only on messages for warning and
caution. The menus and status indications do not change.