Filter
Top Products
Picture Cache Recording
65
Recording
• Some extra frames may be recorded if you stop
recording or switch the card slot while
recording is paused in Frame Rec mode.
Stopping Frame Recording
Set “Setting” of “Frame Rec” of the
CAMERA SET menu to “Off.”
Recording stops and Frame Rec mode is
canceled.
Note
It automatically returns to “Off” when you set the
power switch to OFF, while the “Number of
Frames” setting is maintained.
When the Picture Cache function is active, the
camcorder stores the last few seconds of video
captured in the built-in cache memory to permit
you to start recording video on an SxS memory
card from a point before you start recording.
The maximum picture cache time is 15 seconds.
Notes
• Picture Cache Recording cannot be set to “On”
simultaneously with Frame Recording, Interval
Recording, or Slow & Quick Motion. When you
set Picture Cache Recording to “On,” Frame
Recording, Interval Recording and Slow &
Quick Motion are forcibly set to “Off.”
• The following operations set Picture Cache
Recording to “Off.”
—Setting Interval Recording to “On”
—Setting Frame Recording to “On”
—Setting Slow & Quick Motion to “On”
—Changing the recording format
• When Picture Cache Recording is “On,” the
time code is recorded in Clock mode when it is
selected with the TC/UB SET menu (page 53)
or in Free Run mode in other conditions.
Before starting Picture Cache Recording, make
the necessary settings on the CAMERA SET
menu in advance.
For details on menu operations, see “Basic Menu
Operations” on page 107.
1 Select “P.Cache Rec” of the CAMERA
SET menu.
2 Set “Setting” to “On.”
Picture Cache Recording
Preparatory Settings
00:00
Setting
Rec Time
:
O
ff
: 13-15sec
C
A
M
E
R
A
SET
S
lo
w
S
hutter
Color
B
ar
T
ype
Flicker
Reduce
Interval
Rec
Fra
m
e
Rec
P.
C
ache
Rec
S&Q
M
otion
Multi
B
:
B
B
B
B
B