Filter
Top Products
Rec Review
60
Recording
You can review the last recorded clip on the
screen (Rec Review).
Press the REC REVIEW button after
recording is finished.
You can assign the Rec Review function to an
assignable button to use it instead (page 61).
Playback of the specified block of the clip begins.
In Rec Review, the last 3 seconds, 10 seconds, or
the entire part of the clip is displayed, depending
on the Rec Review setting (page 112) of the
CAMERA SET menu. It is set to 3 seconds at the
factory.
Rec Review is terminated at the end of the clip,
resuming STBY (recording standby) status.
To interrupt Rec Review
Press the REC REVIEW or STOP button or the
assignable button to which you assigned the Rec
Review function.
Rec Review is canceled, resuming STBY
(recording standby) status.
Notes
• If the duration of the last recorded clip is less
than the time (3 or 10 seconds) specified for Rec
Review, the clip is played back from the
beginning to the end.
If the clip was recorded in SD mode and
segmented into multiple files because the file
size exceeded 2GB, only the last file is played.
• During Rec Review playback, the playback
control buttons other than the STOP button are
disabled.
• If the video format was changed after recording,
Rec Review cannot be performed (except when
the change was from SP 1440/23.98P to SP
1440/59.94i).
• The Setup and P.PROFILE menus cannot be
operated during Rec Review.
Rec Review
REC REVIEW
EXPANDED
FOCUS
P
L
A
Y
/
P
A
U
S
E
F
F
W
D
REC REVIEW
button