Filter
Top Products
Set the date and time of the remote control.
Connect the camera to the remote control through Wi-Fi.
The date and time setting of the camera is performed by transferring the date and time
set on the LCD screen of the remote control through the Wi-Fi communication.
[129] Troubleshooting Troubleshooting Live-View Remote
Cannot Turn On the Live-View Remote
Charge the battery pack sufficiently.
[130] Troubleshooting Troubleshooting Live-View Remote
Cannot Charge the Live-View Remote
Turn off the remote control and make the USB connection.
Disconnect the micro USB cable (supplied), and then reconnect it.
Use the micro USB cable (supplied).
Charge the battery pack in an ambient temperature of 10°C to 30°C (50°F to 86°F).
Turn on the computer and connect the remote control.
Release the computer from sleep or hibernation status.
Connect the micro USB cable (supplied) directly to the USB connector of the computer.
[131] Troubleshooting Troubleshooting Live-View Remote
The Remaining Charge Indicator of the Live-View
Remote Is Incorrect
This phenomenon occurs when you use the remote control in an extremely hot or cold
location.
A discrepancy arises between the remaining charge indicator and the actual remaining
battery charge. Fully discharge the battery pack once, then charge it to correct the
indication.
Fully charge the battery pack again. If the problem persists, the battery pack is worn out.