Filter
Top Products
[68] How to Use Changing the Settings of the Live-View Remote Remote Control
Settings
Resetting the Network Settings for Multi Connection
You can reset multi connected network settings.
1. Press the MENU button of the remote control
The list of setting items will be displayed.
2. Press the UP button or DOWN button of the remote control to select (Reset
network settings) in (Remote control settings), then press the REC/ENTER button
of the remote control
3. Press the UP button or DOWN button of the remote control to select , then press
the REC/ENTER button of the remote control
When setting to the multi connection after the reset is completed, you are required to
register devices once again even though they have been already registered.
If (Back) is selected on the confirmation screen, the resetting is cancelled.
Note
To return to the setting item selection screen from the setting value selection screen,
select (Back).
To perform the setting item in the selection screen or the setting value, select .
[69] How to Use
Viewing Viewing
Playback Using the Live-View Remote
Play back images recorded with the camera using the remote control.
The procedure below explains how to play back movies.
1. Press the MENU button of the remote control while selecting the shooting mode, press
the UP button or DOWN button of the remote control to select (Playback
using the remote control), then press the REC/ENTER button of the remote control
2. Select the desired image by pressing the UP/DOWN button