Filter
Top Products
[14] How to Use Getting Started Preparing the Live-View Remote
Attaching the Belt to the Live-View Remote
Attach the belt to the remote control.
1. Place the remote control on the base plate and thread the belt through the belt loop of
the remote control and the base plate as illustrated in , and then attach it as
illustrated in .
You can adjust the belt length depending on the pasting position of and .
2. To fasten the remote control to your arm, wear the remote control with the LCD screen
parallel to the back of your hand and the REC/ENTER button facing toward your
fingertips. Thread the belt through as illustrated on the left below
After attaching , move to cover the end of .
Note
Attaching the belt incorrectly may cause injury.
The GPS antenna is built in the front of the remote control. Placing the remote control
upside down may cause positioning to take long time or may not be able to determine
your position.