Filter
Top Products
button of the remote control
3. Press the UP button or DOWN button of the remote control to select the desired setting
value, then press the REC/ENTER button of the remote control
: Sets the time code
Select 4-digit numbers, then press the REC/ENTER button of the remote control.
The time code can be selected within the following range.
When selecting 30p or 60p
00:00:00:00 (default) - 23:59:59:29
When selecting 25p or 50p
00:00:00:00 (default) - 23:59:59:24
When selecting 24p, you can set the last 2 time code digits of the frames in multiples of 4,
between 0 and 23.
You can set the items below.
TC FORMAT
(default): Records the time code in drop frame
: Records the time code in non-drop frame
In the following situation, time code is recorded in [NDF], and Format will not be
displayed.
When the TV system is [PAL].
TC RUN
: The time code advances sequentially, regardless of the operation of the
camera
(default): The time code advances only during XVAC S movie recording , and it
starts recording sequentially from the time code of the last recorded image
TC MAKE
(default): The newly set-up time code is recorded on recording media
: The last time code of the previous recording is read out from the recording
media and the new time code is recorded sequentially from the last time code.
The time code advances in the REC mode regardless of the setting of .
: Sets the user bit
Set 4-digit numbers, then press the ENTER button.
The user bit can be selected within the following range.
00:00:00:00 (default) - FF:FF:FF:FF
You can set the items below.
UB TIME REC
: Records the time as the user bit