Filter
Top Products
Setting the camera using the Live-View Remote
[8] How to Use Getting Started Preparing the Camera
Inserting/Removing the Battery Pack of the Camera
Insert/remove the battery pack to/from the camera.
Inserting the battery pack
1. Open the cover
Slide the lock lever to the OPEN side.
Open the cover from .
2. Insert the battery pack
There are chances that the battery may not be ejected if the battery ejection sheet is
stored under the battery. Additionally, this may cause water leakage.
1 Align the mark of the battery with that of the camera
2 Place the battery on the battery ejection sheet and insert the battery pack
3 Insert the battery pack, aligning the mark of the battery with that of the camera
and orienting its printed side, as illustrated
3. Close the cover
Securely close the cover and slide the lock lever to the LOCK position. Make sure
that the yellow mark on the lock lever is not visible and the cover is securely closed.