Filter
Top Products
Checking the Connection Mode of the Camera
You can check the connection mode of the camera before connecting the remote control
and the camera through Wi-Fi. You can switch the Wi-Fi setting of the camera that is to be
connected to the Live-View Remote by pressing the Wi-Fi button of the camera.
Check the connection mode of the camera is set to the single connection here.
1. Turn on the power of the camera
2. Check that a mark is displayed on the display panel of the camera
If a mark is not displayed or is displayed above the mark,
press the Wi-Fi button until only the mark is displayed.
[19] How to Use Getting Started Connecting the Live-View Remote to the Camera
(Single Connection)
Checking the Connection Mode of the Live-View Remote
Check the connection mode of the remote control is set to the single connection before
connecting the remote control and the camera through Wi-Fi.
1. Turn on the power of the remote control
2. Press the MENU button of the remote control to select (Connection mode) in
(Remote control settings), then press the REC/ENTER button of the remote
control
3. Check that (Single connection) has been selected and then press the
REC/ENTER button of the remote control
Change to (Single connection) if (Multi connection) is set.