Filter
Top Products
1. Press the MENU button of the remote control
The list of setting items will be displayed.
2. Press the UP button or DOWN button of the remote control to select (IR-
remote controller) in (Connecting devices settings), then press the REC/ENTER
button of the remote control
3. Press the UP button or DOWN button of the remote control to select the desired setting
value, then press the REC/ENTER button of the remote control
: Allows you to operate the camera using the infrared remote controller
(default): Prevents the operation of the camera using the infrared remote
controller
Note
The infrared remote controller RMT-845 (sold separately) is required to use this function.
Purchase one at a Sony service center.
You can operate only in the following settings using the RMT-845 (sold separately). Other
settings are inoperable.
Reset the time code
Start/stop recording
[56] How to Use Changing the Settings of the Live-View Remote Connecting Devices
Settings
Switching NTSC/PAL
You can select a setting, depending on the TV system of the country or region where you
use this camera.
1. Press the MENU button of the remote control
The list of setting items will be displayed.
2. Press the UP button or DOWN button of the remote control to select
(Switching NTSC/PAL) in (Connecting devices settings), then press the
REC/ENTER button of the remote control
3. Press the UP button or DOWN button of the remote control to select the desired setting
value, then press the REC/ENTER button of the remote control
: Select when the TV system is NTSC.
: Select when the TV system is PAL.