Sony RM-LVR2V Camcorder User Manual


 
when the remote control warms up.
If a still picture or a fixed picture is displayed for a long time, an image may remain
superimposed on the LCD screen as a ghosting image.
Bright point and vanishing point of the LCD screen
The LCD panel fitted to the remote control is manufactured with high precision technology,
but a very small proportion of pixels may be “stuck”, either always off (black), always on (red,
green, or blue), or flashing. In addition, because of the physical characteristics of the liquid
crystal display, such “stuck” pixels may appear spontaneously over a long period of use.
These problems are not a malfunction.
Maintenance
Cleaning the LCD screen
The LCD screen surface is specially treated to reduce the reflection of light. Incorrect
maintenance may impair the performance of the LCD screen, so take care with respect to
the following:
Wipe the LCD screen gently with a soft cloth such as a cleaning cloth or glasses cloth.
Stubborn stains may be removed with a soft cloth such as a cleaning cloth or glasses
cloth slightly dampened with water.
Never use a solvent such as alcohol, benzene or thinner, or acid, alkaline or abrasive
detergent, or chemical cleaning cloth, as they will damage the LCD screen surface.
[101] How to Use Others Notes on Using
Live-View Remote Waterproof Performance
About the waterproof performance of the remote control
The remote control is designed to be water-proof. Damage caused by misuse, abuse, or
improper maintenance is not covered by the limited warranty.
Do not subject the remote control to pressurized water, such as from a tap.
Do not use in hot springs.
Use the remote control in the water temperature range of 0 °C to 40 °C (32 °F to 104 °F).
The remote control has continuous waterproof performance at a water depth of 3 m for 30
minutes.
Notes before using the remote control under/near water
Make sure that no foreign matter such as sand, hair, or dirt gets inside the connector
cover. Even a small amount of foreign matter may lead to water entering the remote