Filter
Top Products
Preparation
Assigning the IP Address to the Camera
10
If message “Information Bar” appears, click OK.
If the information bar appears, click on the bar and select
Install ActiveX Control….
If “ Internet Explorer – Security Warning” appears, click
Install.
The installation of ActiveX Control starts. When
installation is completed, the main viewer or the Motion
detection setting menu appears.
Configuring Windows Firewall
The IP Setup Program or SNC audio upload tool may
not operate correctly depending on the configuration of
Windows Firewall. (No cameras are shown in the list
even if they are detected.) In this case, confirm the
Windows Firewall configuration as follows:
Example: In case of IP Setup Program
1
Select Control Panel from the Start menu of
Windows.
2
Select Security Center of the working field.
3
Select Windows Firewall and select Off in the
Windows Firewall dialog.
The cameras will be displayed in the list.
If you want to keep Windows Firewall On, continue
with the following steps.
4
Select the “Exceptions” tab.
5
Select Add Program….