Filter
Top Products
Administrating the Camera
Setting the Camera Image and Audio — Camera setting Menu
35
Click the left button of the mouse on the still image
and drag it diagonally. The red frame that appears
as you drag indicates the cropping area.
4
Click OK at the bottom of the window.
The cropped image is displayed on the main viewer.
5
To close the image, click in the upper-right
corner.
Color
Select Color or Monochrome for the image.
Image flip
The image can be displayed upside down. Select On
when you fix the camera to the ceiling.
Microphone
Select whether you send the audio from the built-in
microphone or from the m microphone input connector.
Select On to send the audio from this network camera.
Note
When you change the Microphone setting, click
Refresh on the Web browser to reflect the change when
opening main viewer page.
Mic volume
Set the volume level of the audio input from the built-in
microphone or the m microphone input connectors. It is
adjustable from –10 to +10.
Audio codec
Select the bit rate when you send the audio from the
built-in microphone or from the m microphone input
connectors. G.711 (64kbps), G.726 (40kbps), G.726
(32kbps), G.726 (24kbps) or G.726 (16kbps) can be
selected.
Note
When the bit rate is set to other than G.711(64bps), the
audio is not output in case of using Java applet viewer.
Speaker output
Set whether you output the audio sent from the computer
connected with the audio input connector to the speaker
(active speaker for example) of the camer aconnected
via line output connectors using SNC audio upload tool
included in the supplied CD-ROM.
Select On to accept the audio data transmission from
SNC audio upload tool.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Picture Tab
You can set the color condition, exposure, etc. of the
camera.
White balance
Select the white balance mode from among Auto,
Indoor, Outdoor, One push WB, and Manual.
Auto: to automatically adjust the white balance
Indoor: to adjust the white balance for shooting indoors
under an incandescent lamp (about 3200 K)
Outdoor: to adjust the white balance for shooting
outdoors (about 5800 K)
One push WB: The One push trigger button is
displayed. Click the button to adjust the white
balance instantly.
Manual: When you select this, R gain and B gain are
displayed and you can set them.
Selectable gain values are from 0 to 255.
Still image
Red trimming
frame
Click the left button of the mouse on
the still image and drag it.