Filter
Top Products
Administrating the Camera
Setting the Camera Image and Audio — Camera setting Menu
36
Exposure mode
Select the exposure mode of the camera from among
Full auto, Shutter priority, and Manual.
The setting items required for each setting appear.
Full auto: The camera executes the gain adjustment and
the shutter speed adjustment automatically.
When you select this, Flickerless mode, Slow
shutter and Backlight compensation are displayed
and you can set them as you require.
Shutter priority: The camera executes the gain
adjustment automatically and you can select the
shutter speed. When you select it, Backlight
compensation and Shutter speed are displayed and
you can set them.
Manual: You can set the exposure manually. When you
select it, Shutter speed and Gain are displayed and
you can set them.
According to the Exposure mode, the following setting
options are displayed.
Flickerless mode
If the image is flickering by the fluorescent light, select
On to reduce it.
Note
This mode is available only for CE model.
Slow shutter
Set the Slow shutter. When On is selected, auto
exposure setting including the long time exposure is set
to suit to the brightness of the scene.
Backlight compensation
You can set On or Off of the exposure compensation.
When you select On, the exposure compensation
function starts to work.
Shutter speed
Select the shutter speed of the camera from the list box.
Selectable values of the shutter speed are 1/10000,
1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/100, 1/50, 1/30,
1/15, 1/8, 1/4, 1/2 and 1/1 second.
Gain
Select the gain from the list box.
Selectable values of the gain are 0, 6, 12 and 18 dB.
Brightness
Tweaks the exposure set in the exposure mode. It is
brighter when a large value is selected, and it is darker
when a small value is selected. The value among –5 to 5
can be set.
Saturation
Select the saturation in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest saturation.
Sharpness
Select the sharpness in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest sharpness.
Contrast
Select the contrast in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest contrast.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
User preset
You can save the present settings in the camera as the
custom, or you can load the settings saved in the camera.
Save: Click to save the present settings of the Picture
tab.
Load: Click to load the saved settings. To use them,
click OK.
MPEG4 Tab
Frame rate
Set the frame rate of the MPEG image.
Selectable values are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25 and
30 fps.
“fps” is a unit indicating the number of frames
transmitted per second.
Bit rate
Set the bit rate of MPEG image transmission for a line.
Selectable values are 64, 128, 256, 384, 512, 768, 1024,
1536 and 2048 kbps.