Filter
Top Products
Administrating the Camera
Setting the User — User setting Menu
41
<MACADDRESS>
Use this tag to embed the MAC address of the interface
whose IP address you have acquired by the DHCP, in the
text or parameter.
<MODELNAME>
Use this tag to embed the camera's model name (SNC-
P1) in the text or parameter.
<SERIAL>
Use this tag to embed the camera's serial number in the
text or parameter.
Setting the User
— User setting Menu
When you click User on the Advanced mode menu, the
User setting menu appears.
Use this menu to set the user names and passwords of
Administrator and up to 9 kinds of users (User 1 to User
9), and the access right of each user.
Administrator, User 1 to 9
Specify User name, Password, Re-type password,
FTP user and Viewer mode for each user ID.
User name
Type a user name between 5 and 16 characters.
Password
Type a password between 5 and 16 characters.
Re-type password
To confirm the password, retype the password typed in
the Password box.
FTP user
Set whether allowed to log in to FTP server or not.
Check the box if allowed to log in to FTP server.
Viewer mode
If the user is authenticated when the main viewer is
displayed, you can select the viewer mode displayed
after authentication.
Full: You can operate all functions in this mode.
Light: You can operate the functions other than the
trigger button on the main viewer, TCP/UDP
switching button on the main viewer, and the frame
rate setting.
View: You can only monitor the camera image.