Filter
Top Products
Administrating the Camera
Sending an Image via mail — e-Mail (SMTP) setting Menu
43
Note
You can access the camera even from a computer having
an IP address whose access right is set to Deny, if you
enter the user name and password set for the
Administrator boxes in the User setting menu.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Sending an Image via
mail
— e-Mail (SMTP) setting
Menu
When you click SMTP on the Advanced mode menu,
the SMTP setting menu appears.
By using e-Mail (SMTP) function, you can send a mail
with attached image file which has been shot linked with
the external sensor input or with the built-in motion
detection function. The image file can also be sent
periodically.
The e-Mail (SMTP) setting menu is composed of three
tabs: Common, Alarm sending and Periodical
sending.
Common Tab — Setting the e-Mail
(SMTP) Function
e-Mail (SMTP)
Select On when you use the e-Mail (SMTP) function.
The common setting options are displayed below.
If you do not wish to use the e-Mail (SMTP) function,
select Off and click OK.
Notes
• During transmission of an image file via mail, the
frame rate and operation performance of the monitor
image of the main viewer decline.
• While the camera video mode is set to MPEG4, the
image of the composite video signal output from the
video output connector of the camera may be distorted
during mail transmission.
• You cannot send an audio file by using the mail
sending function.