Filter
Top Products
NETWORK PTZ CAMERA User Guide
62
NETWORK PTZ CAMERA User Guide
63
Chapter 4. Using Web Viewer
To save a desired location for the Pan/Tilt or Zoom/Focus operation along with detailed
camera settings for the location, configure the following options.
Category Description
Number Select a number to identify a preset. (Preset numbers 1 to 255 are available.)
Name Name a preset.
Move Moves to a selected preset when its number is selected.
Edit Enables detailed camera settings to be configured for a preset.
Add
Saves a preset; move to a desired location for the Pan/Tilt or Zoom/Focus operation,
enter a preset number and name, and then press the Add button to save the location
as a preset.
Delete Deletes an existing preset; select a preset number, and then press the Delete button.
•Newsettingsaresavedonlyifyouclickthe button on the right of the screen.
To configure detailed camera settings for a preset, select a preset number, and then move the
camera to the preset before pressing the button.
■Preset Setup
■Sequence Setup
■Swing Setup
Category Description
Swing
Commands the camera to move between 2 selected presets, monitoring the
route.
Group
Recalls groups of multiple preset locations consecutively. A group can contain up
to 255 presets.
Tour
Recalls groups of presets consecutively in an orderly manner. Up to 6 groups can
be listed for this function.
Trace & Auto Run
Trace saves and reactivates patterns of custom camera movements. Up to 4
movement patterns can be memorized.
Auto Run commands the camera to automatically perform a preset sequence
action if no command has been entered via the controller for a while.
Category Description
Sequence
Setup
Mode 3 modes are available: Pan Swing, Tilt Swing, and P&T Swing.
Pan Swing Activates only the Pan operation for Swing monitoring.
Tilt Swing Activates only the Tilt operation for Swing monitoring.
P&T Swing Activates both the Pan and Tilt operations for Swing monitoring.
First Preset Select the first preset for a route consisting of 2 presets.
Second Preset Select the second preset for a route consisting of 2 presets.
Speed
Select the camera’s movement speed between the first and second presets.
(Levels 1 to 64 are available.)
DWT(Dwell Time)
Select the number of seconds to keep the PTZ camera on a preset location for
monitoring.
You can configure detailed sequence settings for each camera mode. Available camera
modes are Swing, Group, Tour, Trace, and Auto Run, and they are described in the chart
below.
4.2.2.1. Swing
• New settings are saved only if you click the button at the bottom of the screen.
The button operates the camera with the selected settings.
Caution
Caution