Filter
Top Products
NETWORK PTZ CAMERA User Guide
16
NETWORK PTZ CAMERA User Guide
17
Chapter 3. Installing Camera & Network Setup
3.1. PTZ Dome Camera and Accessory Wiring Diagrams
Connecting directly to the SCC-3100A controller
Connecting to the NVR (SNR-6400/3200)
· RS-485:
· RS-422:
Camera
Camera
D+
D-
TX+
TX-
D+
D-
RX+
RX-
RX+
RX-
TX+
TX-
TX+
TX-
SCC-3100A
Data Box Port 1
SCC-3100A
Data Box Port 1
SCC-3100A Data Box
Local Area
Network
IP Camera
SNR-
6400/3200
SW1
ON ON ON
ON ON
1 1 1
1 1
2 2 2
2 2
3 3 3
3 3
4 4 4
4 4
SW4
SW2
SW5
SW3
3.2. DIP Switch Settings
• Protocol Settings
Select a communication protocol for the camera.
SW (Pin No.) Purpose
SW1(1~4) Protocol Settings
SW2(1~2) Baud Rate Settings
SW2(3) Transfer Method Settings
SW2(4) Response Mode Settings
SW3(1) TBD
SW3(2~3) Termination Settings
SW3(4) TBD
SW4, SW5 Camera ID Setup
No Protocol SW1-#1 SW1-#2 SW1-#3 SW1-#4
1 Samsung OFF OFF OFF OFF
2 Pelco-D OFF OFF OFF ON
3 Pelco-P OFF OFF ON OFF
4 Samsung Elec. OFF OFF ON ON
5 Panasonic OFF ON OFF OFF
6 Vicon OFF ON OFF ON
7 Honeywell OFF ON ON OFF
8 AD OFF ON ON ON
9 Reserved ON OFF OFF OFF
10 Reserved ON OFF OFF ON
11 Reserved ON OFF ON OFF
12 Reserved ON OFF ON ON
13 Reserved ON ON OFF OFF
14 Reserved ON ON OFF ON
15 Reserved ON ON ON OFF
16 Reserved ON ON ON ON
※ Factory Release Mode: Samsung Techwin (OFF/OFF/OFF/OFF)
No Baud Rate(BPS) SW2-#1 SW2-#2
1 2,400 ON ON
2 4,800 ON OFF
3 9,600 OFF OFF
4 19,200 OFF ON
Select the transfer speed for a selected communication protocol.
• Baud Rate Settings
※Factory Release Mode: 9,600BPS