Filter
Top Products
NETWORK PTZ CAMERA User Guide
66
NETWORK PTZ CAMERA User Guide
67
Chapter 4. Using Web Viewer
The following page appears when selecting at the top of the screen. Buttons on
the left side of the screen move to the relevant menu page.
4.2.3.1. Network
4.2.3. Config Page
LAN, xDSL, and DHCP options are available depending on your network environment.
■Interface
Category Description
LAN If the camera uses a static IP, enter the network information of the camera.
xDSL Enter the ID and password of your xDSL server.
DHCP Select this option when the camera receives an IP from a DHCP server.
■PTZ Trace Setup
■Auto Run Setup
Category Description
Trace No. Up to 4 traces can be saved.
Replay Replays a route saved by the Trace function.
Memorize
Pressing the Memorize button starts saving the route of the Pant/Tilt or Zoom/
Focus operation automatically.
Stop
During Replay mode, press the Stop button to abort the Trace operation.
During Memorize mode, press the Stop button to finish memorizing a route.
Category Description
Mode 8 modes are available: OFF, HOME, Preset, Swing, Group, Tour, Trace, and A.Pan.
Time
Select time to activate Auto Run. (1 to 60 seconds and 1 to 60 minutes are
available.)
Number
In the HOME and Preset modes, Number is used to set up preset numbers.
In the Swing mode, Number is used to set up the Pan, Swing, and P&T modes.
In the Group and Trace modes, Number is used to set up groups and trace
numbers.
In the A.Pan mode, Number is used to adjust the Pan speed.
Tilt Angle
Available only in the A.Pan mode; enables a tilt angle to be set up for the Pan
operation.
Speed Available only in the A.Pan mode; enables to set the Pan operation speed.
4.2.2.4. Trace & Auto Run
•PressingtheSet,Clear,orStopbuttonabortssequenceaction,forexample,PTZoperationsofthe
camera like Preset, Group, Tour, etc.
Caution