Filter
Top Products
Customizing Your Camcorder
115-GB
Changing the SETUP display
Icon/item
OTHERS
REMAIN
Option
z AUTO
ON
Meaning
To display the remaining capacity of the disc in
the following cases for example:
• For 8 seconds after setting the power on and
the mode dial to (Movie) or
(Still)
• For 8 seconds after recognising the inserted
disc into your camcorder in (Movie) or
(Still)
• For 8 seconds when set the display to on by
pressing DISPLAY/BATT INFO in (Movie)
or (Still)
• When the remaining capacity of the disc is less
than 5 minutes in (Movie) or 20 in (Still)
• For 8 seconds when starting recording from
the line input
To always display the remaining capacity of the
disc
Mode dial
Movie
Still
Play/Edit
Notes
•If you press DISPLAY/BATT INFO with [DISPLAY] set to [V-OUT/LCD] in the SETUP display,
the picture from a TV or VCR will not appear on the LCD display even when your camcorder is
connected to outputs on the TV or VCR.
•If more than 5 minutes passes after removing the power source, the [PROGRAM AE], [FLASH
LVL], [WHT BAL], [COMMANDER], and [HiFi SOUND] settings are returned to their factory
settings. Other settings are held in memory even when the battery is removed.
Tip
When recording a close subject, if [REC LAMP] is set to [ON], the red camera recording lamp on
the front of the camcorder may reflect on the subject if it is close. In this case, it is recommended to
set [REC LAMP] to [OFF].