Filter
Top Products
Shooting movies/still images
37-GB
To select the still image quality
You can select the image quality for still image recording.
The default setting is [FINE].
1 Set the mode dial to (Still).
2 Press SETUP.
3 Select (CAMERA SET) with v/V, then press ENTER.
4 Select [QUALITY] with v/V, then press ENTER.
The amount of recording data varies depending on the settings for image
quality.
5 Select the desired image quality with v/V, then press ENTER.
6 Press SETUP
The SETUP display disappears from the LCD display.
Image quality settings
Setting Meaning
FINE (FINE) Use this mode when you want to record high quality
images. Fine images are compressed to about 1/4.
STANDARD (STD) This is the standard image quality level for your
camcorder. Standard images are compressed to about
1/10.
Shooting movies/still images
[ SETUP ] : END
SELFTIMER
BURST
QUALITY
OFF
N. S. LIGHT
RETURN
IMAGESIZE
CAMERA SET
[ SETUP ] : END
SELFTIMER
BURST
QUALITY
FINE
REMAIN
[2000]
N. S. LIGHT
RETURN
IMAGESIZE
CAMERA SET
STANDARD
[ SETUP ] : END
PROGRAM AE
FLASH MODE
FLASH LVL
WHT BAL
MANUAL SET