Sony DCR-DVD100E Camcorder User Manual


 
118-GB
Types of trouble and corrective action
During recording and playback
Symptom Cause and/or Corrective Actions
The battery pack is not installed, or is exhausted or nearly
exhausted.
c Install a charged battery pack. (page 15)
The AC adaptor is not connected to a wall socket.
c Connect the AC adaptor to a wall socket. (page 18)
The operating temperature is too low.
The battery pack is not fully charged.
c Charge the battery pack fully again. (page 16)
The battery pack is completely dead, and cannot be
recharged.
c Replace with a new battery pack. (page 15)
You have used the battery pack in an extremely hot or
cold environment for a long time.
The battery pack is completely dead, and cannot be
recharged.
c Replace it with a new battery pack. (page 15)
The battery pack is exhausted.
c Install a fully charged battery pack. (page 15)
A problem has occurred in the display of the remaining
battery time.
c Charge the battery pack fully again so that the indication
on the remaining battery time indicator is correct. (page
16)
A problem has occurred in the display of the remaining
battery time.
c Charge the battery pack fully again so that the indication
on the remaining battery time indicator is correct. (page
16)
Battery pack performance decreases in low-temperature
surroundings and recording may not be possible even
though the battery time remaining may be as much as 20
minutes.
c Recharge the battery pack fully. (page 16)
The [REMAIN] item is set to [AUTO] in (OTHERS) in
the SETUP display.
c Set it to [ON] to always display the remaining disc space
indicator. (page 115)
Vibration occurs depending on the condition of the disc.
This is not a malfunction.
Moisture condensation has occurred.
c Turn off your camcorder and leave it for at least an hour
to acclimatise it. (page 130)
The temperature of your camcorder is extremely high.
c Turn off your camcorder and leave it for a while in a
cool place.
The power does not turn on.
The battery pack is quickly
discharged.
The battery remaining time indicator
does not indicate the correct time.
The power goes off although the
remaining battery time indicator
indicates that the battery pack has
enough power to operate.
Remaining disc space indicator is not
displayed.
Your camcorder vibrates.
The % indicator flashes.
The indicator flashes.