Filter
Top Products
105
IP Camera User’s Manual Speco Technologies
knowing IP address of THE CAMERA. Domain Name must be unique. Register after checking if it
is duplicate or not.
③ is to check whether the Camera is to be open or not. ④ is for the function to connect to
THE CAMERA easily by User’s ID and Password registered in THE CAMERA, to monitor or control
Video of THE CAMERA on Mobile Phone. (Mobile Phone Users should tick “Enable” and input
connection ID and Password.)
‘EMAIL SERVICE’ is the function to send the set message to E-mail address set by user upon
alarm on THE CAMERA in case user set the use of alarm server as Enable. (refer to ‘Alarm Setting’
in ‘4. Expert Setting’). It’s available to input up to 5 Mail address and input up to 5 messages
upon checking on ‘ENABLE’.
Fig. 5―13 Camera Registration
‘SMS SERVICE’ is the function to send the set message (SMS) from Service Server to Mobile
Phone number set by user upon alarm on THE CAMERA, in case setting to use Alarm Server as
‘ENABLE’. (refer to ‘Alarm Setting’ of ‘4. Expert Setting’). It’s available to input up to 5 Mobile
Phone to get SMS Message and input up to 5 messages upon checking on ‘ENABLE’.
Cautions : Input Mobile Phone Number without ‘-‘.
Click ‘Camera Registration’ to save the registered information after input of all information.
5.4.3. List of Camera
Input the registered User ID and Password to connect to Service Server on [5-7].