Filter
Top Products
93
IP Camera User’s Manual Speco Technologies
Up to 8 programmable user-defined patterns set by the five keys on the Webviewer
GUI are available.
G-2. PATTERN SET – PATT TITLE
To set PATTERN TITLE, select up to 16 characters using Five keys to the left or right.
Press ZOOM TELE button moves to the next character from the left to the right
direction and ZOOM WIDE button moves to the next character from the right to left
direction (Space displays when appears) Pattern title is not displayed on the monitor,
but only for the reference of user.
G-3. PATTERN SET – DATA FILL
To fill the programming data, press FOCUS FAR button in order to start the data fill up.
Filling data is programmed according to the the five keys on the Webviewer GUI
movement. Press FOCUS FAR button again in order to escape.
G-4. PATTERN SET – SAVE
To saving the filling data, move five keys to the right direction when the cursor is on
SAVE. Then the cursor moves to the PATT NO.02 in order to prepare next pattern no.
G-5. PATTERN SET – EXIT
To escape this page, move five keys to the right direction