Filter
Top Products
78
IP Camera User’s Manual Speco Technologies
- ON :The ID name will displayed in the monitor.
- OFF : The name will not displayed in the monitor.
• CAMERA ID : Enter up to 8 characteristic.
• ID POSITION : Select the screen position of the camera ID.
C. LENS
• DC : Use When using DC lens.
• MANUAL : Use When using Manual lens.
D. WDR
• WDR (Wide Dynamic Range) : You can adjust the desired WDR BIAS from -20 to 20 and WDR
RANGE from 0 to 36
E. WB CONTROL
• ATW (Auto Tracking White Balance) : The camera automatically control the white balance in any
environment.
• AWB (Auto White Balance) : The white balance is automatically adjusted in a specific environment.
• MANUAL : Users can adjust the colors by adding or reducing the WB level.
You can adjust the desired WB level from 2K to 11K
F. LOW LIGHT
• SLOW SHUTTER : Control Image brightness by adjusting shutter speed
You can adjust the desired shutter speed from off to X32
- AGC : ON (You can adjust the desired AGC level from 0 to 60dB) or OFF (Deactivate automatic gain
control feature)
• AUTO D/N : AUTO DAY/NIGHT
G. SPECIAL
• VIDEO : NTSC or PAL SELECTION
• FLIP : HORIZONTAL REVERSE (OFF or ON)
• SYNC
- INTERNAL : Internal synchronization
- INTERNAL2 : Internal synchronization (Color Rolling Mode)
- LINE LOCK : Phase adjustment may be necessary in multiple camera installations to prevent picture
roll
when switching between cameras
• BACK LIGHT : BACK LIGHT ADJUST or SELECT AREA
• RESOLUTION : Select Resolution of CCD or PIXIM
• COLOR MODE : COLOR or B/W SELECTION