118
IP Camera User’s Manual Speco Technologies
7. Appendix
Appendix A Basic Setting Table
Item Default (Basic Setting) Remarks
Network Setting
Static IP / Dynamic IP Static IP
IP Server Enable
IP Address 192.168.1.7
Gateway 192.168.1.1
Subnet Mask 255.255.255.0
Web Connection Port 80
Authentication /Control Port
9000
Video Streaming Port 9001
Motion Detection Port 9005
*. Don’t register the same Port.
*. Register Number with ‘9999’ or less
Some Network may not support over
number 10000 port.
ID and Password
Administrator ID /Password admin/admin
User ID root/root, guest/guest
Domain of Related Server
IP Server Ipcam4u.net
Domain of Server to connect to
register IP
Alarm Server Ipcam4u.net
Domain of Server to connect to send
Event upon detection of Sensor or
Motion.
Upgrade Server Ipcam4u.net
Domain of Server to connect to
download upgraded program
Plug-in Download Server Ipcam4u.net
Video Setting
Compressed Resolution 704*480 / 352*240 704*576 / 352*288
Video Format NTSC PAL
Frame Rate 30fps / 1fps 25fps / 1fps
Bit Rate VBR_High / VBR_Normal VBR_High / VBR_Normal
Other Setting
Time Zone Asia/Seoul(Korea)
*. Note : In case to reset Hardware, Network Setting, User and Administrator’s ID and
Password will be automatically returned to above default value.