Filter
Top Products
82
IP Camera User’s Manual Speco Technologies
5.2.1. OSD MAIN MENU TABLE (PAGE 54) The default setting is BLANK.
Press any number from 001~255 with preset button on password blank and again it on
confirm blank. Then “CONFIRMED” is displayed on the monitor and the menu will go
back to the previous page automatically.
<CONFIRMED> <CANCELLED>
If user presses wrong preset number between PASSWORD and CONFIRM,
“CANCELLED” is displayed on the monitor and if user failed 3 times, the menu will
return to the previous page automatically * After setting a Password, an operator must
press memorized password in order to enter OSD MAIN MENU, or to change the data
which is memorized originally.
* An operator must remember the password for the operation. Manufacturer doesn’t
provide a memorized password.
A-8-3. DOME SET – [NEXT PAGE] – [OSD DISPLAY]
OSD ID displayed after set ON in here and it can be hiding if selected OFF. Move five
keys to the right or left direction in order to select OFF/ON when the cursor is located
each item.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CONFIRMED