21
IP Camera User’s Manual Speco Technologies
6) Put ‘admin’ in ID and Password line, click ‘Login’, then [3-3] ‘Administrator's Page’
will be shown. (ID, Password of THE CAMERA is preset as admin/admin in
Administrator’s Page. Change Administrator’s ID and Password in General Setting of ‘
4.
Expert Setting’
Fig. 3―3 Administrator’s Page
7) Click “Network Setting’ in left menu on [3-3], [3-4] appears.
8) Click ‘Static IP Address’ in ‘IP Setting’ of [3-4], and input IP Address, Subnet Mask,
Default Gateway according to Network environment to connected THE CAMERA to.
9) For setting of ‘DNS Server’, input DNS Address to fit with Network Environment to set.
Use DNS value normally set in PC.
10) DNS Address must be entered.
11) Click ‘Save’ Button of [3-4] to save setting value.