Filter
Top Products
20
IP Camera User’s Manual Speco Technologies
3.2. Installation without IP sharing device (Router)
3.2.1. Static IP Setup
1) After checking Video in ‘Video Check’, go to the next step.
2) Connect THE CAMERA to PC with LAN Cable (Crossover Cable).
3) Cable connection and Network Setup should be same as shown in ‘
2. Install and
Video Check’.
4) Run Web Browser and input 192.168.1.7 in URL and click ‘Enter’, then [Fig. 3-1] will
appear.
Fig. 3―1 Main Page of THE CAMERA Network Camera
5) Click ‘Administrator’s Page’ of [Fig. 3-1], then Browser shows [3-2] Log-in
Page.
Fig. 3―2 Administrator Page Log-in