Filter
Top Products
125
IP Camera User’s Manual Speco Technologies
Interface 10/100Mbps
Current Users 20
Manual Yes
Schedule Yes
Motion Detection Yes
Recording@PC
Sensor event Yes
Sensor Trigger/Motion Detection Yes
Event& Alarm
Alarm Notification SMS/E-MAIL/Alarm Sound(Option)
Video Output
VBS:1.0Vp-p/75 Ohm
Dimension
158.8φ (D) * 163.0mm(H)
Power Source
DC12V 1.0A
Power Consumption (Max.)
12W Max
Operational Temperature 0'C ~ 50'C
PHYSICAL
Weight 1.7Kg
Video Out 1
RS485 Interface 1/1
Sensor In/Relay Out 2/2
Ethernet Jack RJ45(10Base-T/100Base-TX)
CONNECTIVITY
Protocols
HTTP, FTP, SMTP, TCP, IP, DHCP,
ICMP, NTP, DNS, DDNS
Browser Internet Explorer
®
Ver. 6.0+
Operating System Windows
®
2000/XP
Processor Intel
®
Pentium
®
Ⅲ1GHz+ (P4 2.4Ghz+ recommended)
REQUIREMENTS
Memory 256MB+ (512MB+ recommended)
Appendix C To solve problem
C-1 Basic Check-point
C-1-1 Booting
Check if power plug is connected correctly.
C-1-2 Network cable (LAN cable) and cable connection check
Check if network cable is straight LAN cable. Hold each end of both side and check if
same color’s cable is connected to same location in RJ-45 jack or not.
Check if network cable connects correctly with THE CAMERA.
Check if network cable connects correctly with Hub, IP sharing device and cable modem
etc….
*. If you found a problem in the product, first check with “C-1 Basic check point” and solve the
problem as following procedures:
C-2 Troubleshooting by type
C-2-1 Cannot connect with network