Filter
Top Products
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP302PI
24
Mail Port: Assign the SMTP port in the text box. The default SMPT port is 25.
For the free mail service, please enter the correct port number from the
service provider.
Wan IP Change Notification: Enable this option, then a mail will be sent if
the Wan IP of router above the camera is changed.
Secure Connection: If the mail server requires an encrypted connection, you
should select the SSL option. TTLS is an extension to plain text
communication protocols. It offers a way to upgrade a plain text connection
to an encrypted (TLS or SSL) connection.
Click Apply to save the setting, then use Test button to test the server connection. A
message box will tell you “OK!” if it works, and a test e-mail will be sent to receiver’s
mail address.
FTP Setting:
FTP Server: Enter the IP address of the target FTP server.
Username & Password: Enter the username and password to login into the
FTP server.
Port: Enter the port number used for the FTP server.
Path: Enter the destination folder for uploading the images. For example,
/302PI.
Mode: In PORT mode, the FTP server builds the connection to the user’s
data port actively. However, from the user-side firewall’s standpoint, the
action of connecting from FTP server is often considered to be dangerous
and should be blocked. In PASV mode, the problem is solved: The FTP server
waits for the data transmission connection built by the user. Make sure that
the server supports the mode you select.
Create the folder: Select Yes, then folders will be created folder by date
under your FTP path.
Click Apply to save the setting, then click Test button to test the server
connection. A message box will tell you “OK!” if it works, and a test file will be
uploaded to FTP server.
Samba Setting:
Location: Enter the path of the shared folder.
Workgroup: Type in the workgroup name of the computer.
Username & Password: Enter the username and password to login into the
Samba.
Create the folder: Select Yes, then folders will be created by date under
your Samba Server.
Click Apply to save the setting, then use Test button to test the server
connection. A message box will tell you “OK!” if it works, and a test file will be
created in the location.