Filter
Top Products
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP302PI
26
Privacy Mask: For the security and privacy purpose, there are three areas can be
setup for privacy mask. Click Area button first and drag an area on the above
image, and remember to save your setting. The masked area will not show on
both the live view and recording.
Brightness, Contrast, Hue, Saturation, Sharpness can be adjusted here.
AGC: Automatic gain control. The sensitivity of camera can adjusts with the
environmental light. Enable this function and the brighter image can be got
under dim light, but the level of noise may also increase.
Shutter Time: Choose as the location of your camera or fixed shutter time. The
shorter the shutter time is, the less light the camera receives and the image
becomes darker.
Sense-Up: This function increases the sensitivity of camera to get brighter image
at night. The smaller the value you select, the slower the shutter speed becomes
so that the image will get brighter, and moving subjects might be blurred.
Sense-Up option is only enabled when users select "outdoor" or "indoor" in
shutter time option.
D-WDR: Digital Wide dynamic range. This function enables the camera to reduce
the contrast in the view to avoid the dark zones resulting from over and under
exposure.
Video Orientation: Flip, mirror, or rotate the image.
Day & Night: The camera can detect the light level of environment. If you choose
"Light Sensor Mode", the image will be turned to black and white at night in
order to keep clear. To set light sensor mode, appoint a lux standard of switching
D/N here. Current lux value is provided for reference. Under "Times Mode" the
switch time of Color / Black and white is according to the given time. If you select
"Synchronize with DI input", the image turns to black and white when digital
input is triggered. You can also control it by choosing "Color" or "B/W".
DNR: Digital Noise Reduction. This function is able to filter the noise and blur
from the image and show a clearer view.
Note: When you select a number in "Shutter Time", actually the shutter time varies in
a range and controlled by camera automatically. Following table shows the shutter
time option and corresponding range.
Option
Shutter Time Range (sec.)
Outdoor
1/10000 ~ Selected number in "Sense-up"
Indoor
NTSC: 1/125 ~ Selected number in "Sense-up"
PAL: 1/100 ~ Selected number in "Sense-up"
1/30
1/10000 ~ 1/30
1/50
1/10000 ~ 1/50
1/60
1/10000 ~ 1/60
1/100
1/10000 ~ 1/100
1/125
1/10000 ~ 1/125
1/250
1/10000 ~ 1/250
1/500
1/10000 ~ 1/500
1/1000
1/10000 ~ 1/1000
* Sense-up options: 1/30, 1/15, 1/10, 1/5