Filter
Top Products
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP302PI
6
3.
Plug in and connect the power adapter to the camera. If you are using the PoE to
supply power to the camera, please skip to the next step. Click Next when you
are done.
4.
Connect a network cable to the camera’s network port and then to your router.
If you are using PoE, please ensure the cable is connected to a PoE switch or PoE
injector.
5.
Wait while camera is searching.
6.
The founded cameras will show on the screen. The camera already selected by
default if you have only one camera installed. If you have more than one camera
in the same Network, you will need to identify the camera by the MAC ID. Click
Next.