Filter
Top Products
VIP X1600 M4S Specifications | en 113
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
9 Specifications
9.1 VIP X1600 M4S Encoder Module
9.2 Protocols/Standards
Operating voltage Supply via VIP X1600 XF base housing
Power consumption Max. 12 W
Data interfaces 1 × RS-232/RS-422/RS-485, bidirectional, push-in terminal
Alarm inputs 4 × push-in terminals (non-isolated closing contact),
maximum activation resistance 10 Ohm
Relay outputs 4 × push-in terminal, 30 V
p-p
, 2 A (SELV), 8 contacts
Video inputs 4 × BNC socket 0.7 to 1.2 V
p-p
, 75 Ohm, PAL/NTSC
Audio inputs Audio versions only:
2 × 3.5 mm stereo socket, mono
5.5 V
p-p
max., impedance 9 kOhm typ.
Thermal value 41 BTU/h
Operating conditions Temperature: 0 to +50 °C / +32 to +122 °F,
relative humidity: 20 to 80%, non-condensing
Approvals IEC 60950; UL 1950; AS/NZS 3548; EN 50121-4, EN 55103-
1, -2; EN 55130-4; EN 55022; EN 55024; EN 61000-3-2;
EN 61000-3-3; FCC 47 CFR Chapter 1 Part 15
Weight approx. 120 g / 0.27 lb
Video standards PAL, NTSC
Video coding protocols MPEG-4, H.264 Baseline Profile, M-JPEG
Video data rate 9.6 kbps to 6 Mbps per channel
Image resolutions (PAL/NTSC) 704 × 576/480 pixels (4CIF/D1)
704 × 288/240 pixels (2CIF)
464 × 576/480 pixels (2/3 D1)
352 × 576/480 pixels (1/2 D1)
352 × 288/240 pixels (CIF)
176 × 144/120 pixels (QCIF)
Total delay 120 ms (PAL/NTSC, MPEG-4, no network delay)
Image refresh rate 25/30 ips max.
Network protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, DHCP, IGMP V2,
IGMP V3, ICMP, ARP, SNMP (V1/V2c/V3 MIB-II), 802.1x
Audio coding protocol G.711, 300 Hz to 3.4 kHz
Audio sampling rate 8 kHz
Audio data rate 80 kbps