Filter
Top Products
94 en | Operation VIP X1600 M4S
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
6.4 Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process (see Section Allow local recording, page 41).
You can save video sequences from each of the four cameras in the Quad View. The icons
below the camera images apply to the four camera images in the following sequence: top left,
top right, bottom left, bottom right.
1. Click the icon to start recording. The storage location depends on the configuration of
the module (see Section Path for JPEG and MPEG files, page 41). A red dot in the icon
indicates that recording is in progress.
2. Click the icon again to stop recording.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 5.19 Advanced Mode: Encoder Profile, page 44).
6.5 Running Recording Program
The hard drive icon below the camera images on the LIVEPAGE changes during an automatic
recording.
A moving graphic will appear to indicate a running recording. If no recording is taking place, a
static icon is displayed.
i
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied with the VIP X1600 XF base.
i
NOTICE!
You can ascertain from the Quad View for which camera a recording is running by moving the
mouse cursor over the icon. A message is displayed below the mouse pointer.