Filter
Top Products
18 en | Installation VIP X1600 M4S
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Rating Plates
Every module has a label on the circuit board containing a printed MAC address by which the
module can be uniquely identified. Take note of this MAC address and the location in the
VIP X1600 XF base before installation so that you can later identify the module, even after it
has been inserted, for example when performing fault diagnosis.
Removing and Exchanging Modules
It is also possible to install, remove and exchange modules during operation.
1. Before removing a module, terminate all recordings currently running in this module.
2. When installing a module, please ensure that the cover is kept for future use.
3. When removing a module, it is essential that the corresponding slot be closed with the
cover if a module is no longer to be used in this slot. The opening must be closed to
ensure that the unit remains cool.
!
CAUTION!
Ensure that Slot 1 is always populated by a module, even when modifying the installation.
Malfunctions may occur when the VIP X1600 XF is switched on without a functional module in
Slot 1.