Filter
Top Products
59
Recording
With the custom function [LANC AE SHIFT] ( 97), you can change the function of the AE SHIFT
dial on the optional ZR-2000 Zoom Remote Controller and use it to change the aperture value.
Push AE
In M Manual mode you can use the Push AE function
when you want the camcorder to re-establish optimal
exposure settings by automatically adjusting the
aperture and gain (if the AGC switch is set to ON).
Press the PUSH AE button and hold it pressed
down.
• The camcorder will adjust the aperture value and gain
to achieve optimal exposure ( mark above the
exposure indicator).
• After you release the button, the aperture value and gain (if the AGC switch is set to ON) set by the
camcorder will override the previous settings made in M Manual mode.
You can use the custom keys ( 73) or the [SYSTEM SETUP/ ] [E.LCK B.LCK] setting to
prevent the accidental operation of the PUSH AE button.
PUSH AE
button
COPY