Filter
Top Products
43
E
Advanced Functions
More Recording Options
More Recording Options
Manually Adjusting the Exposure
Adjust the exposure when a subject is underexposed (for example, when backlit subjects
appear too dark in the image) or overexposed (for example, when recording subjects
under very strong light and they appear too bright or glaring in the image).
To change the operating mode, refer to About the Operating Modes (11).
Mode switch: (except for the [ FIREWORKS] recording program).
1. Press ( ).
• The exposure adjustment indicator and the neutral
value “±0” appear on the screen.
• If you operate the zoom during exposure lock, the brightness
of the image may change.
2. Adjust ( ) the brightness of the image as required.
• The adjustment range depends on the brightness of the picture at the time you
locked the exposure.
• Pressing ( ) again will cancel the exposure lock and return the camcorder to
the previous setting.
Changing the Metering Method
You can select the light metering mode.
To change the operating mode, refer to About the Operating Modes (11).
Mode switch:
Options
(37)
EVALUATIVE
[EVALUATIVE] Appropriate for standard shooting conditions, including
backlit scenes. The camcorder divides the picture into
several zones for light metering and evaluates
complex lighting conditions for the optimal exposure of
the subject.
[ CENT.WEIGHT.AVERAGE] Averages the light metered from the entire screen,
giving more weight to the subject in the center.
[ SPOT] Meters the area within the spot AE point frame. Use
this setting to adjust the exposure to match the subject
in the center of the screen.
Metering Method icon
Desired option
EXP
EXP
FUNC.
FUNC.