Canon DC100 Camcorder User Manual


 
72
Although the battery pack’s operating temperature range is from 0 °C to 40 °C (32 °F
to 104 °F), the optimal range is from 10 °C to 30 °C (50 °F to 86 °F). At cold
temperatures, performance will temporarily decline. Warm it in your pocket before use.
Replace the battery pack if the usable time after full charge diminishes substantially at
normal temperatures.
About the battery terminal cover
The battery terminal cover has a [ ]-shaped hole. This is useful when you wish to
differentiate between charged and uncharged battery packs.
Mini DVD Disc
The recording surface of DVD discs is extremely delicate. Be sure to observe the
following precautions when handling your discs.
Keep the disc clean of dust, dirt or smudges. Even very small smudges or particles of
dust can lead to problems when recording or playing back the disc. Carefully inspect the
recording surface of the disc before inserting it in the camcorder. If the disc gets dirty
use a dry, soft lens-cleaning cloth to remove any fingerprints, dirt buildup or smudges
from the disc surface. Clean the disc in a radial motion from its center outwards.
Never use a chemically treated cloth or flammable solvents such as paint thinner to
clean the disc.
Do not bend, scratch or wet the disc and do not subject it to strong shocks.
Do not attach labels or stickers on the disc surfaces. The disc may not rotate in a stable
manner and this may cause malfunctions.
Return discs to their case for storage.
When writing on the label side of the disc, avoid hard tip pens. Use waterproof soft-
tipped felt pens instead.
Moving a disc rapidly between hot and cold temperatures may cause condensation to
form on its surfaces. If condensation forms on the disc, put it aside until the water
droplets have evaporated completely.
Never expose the disc to direct sunlight and do not store it in places subject to high
temperatures or high humidity.
Make sure to finalize a disc before inserting it in a DVD player, DVD recorder or a
computer’s DVD drive. Failing to do so can result in the loss of the recorded data.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the date/time and other
settings. The built-in lithium battery is recharged while you use the camcorder, however, it
will become totally discharged if you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power adapter to the
camcorder and leave it connected for 24 hours with the power switch set to .
Back side of the
battery pack
Terminal cover attached
Charged Uncharged