Canon ELPH135SIL Digital Camera User Manual


  Open as PDF
of 147
 
130
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
9
Appendix
Acameraerrorwasdetected(error number)
•If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
•Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
FileError
•Correct printing (=
117) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Printerror
•Check the paper size setting (=
119). If this error message is displayed when the
setting is correct, restart the printer and complete the setting on the camera again.
Inkabsorberfull
•Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Wi-Fi
Connectionfailed
•No access points were recognized. Check the access point settings (=
96).
•A device could not be found. Turn the camera off and on again, and retry the
connection.
•Check the device you want to connect to and make sure it is ready for connection.
Cannotdetermineaccesspoint
•The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
Noaccesspointsfound
•Check to make sure that the access point is turned on.
•When connecting to an access point manually, make sure that you entered the
correct SSID.
IncorrectWi-Fiencryptionkey/IncorrectWi-Fisecuritysettings
•Check the access point security settings (=
95).
IPaddressconict
•Reset the IP address so that it does not conict with another.
Disconnected/Receivingfailed/Sendingfailed
•You may be in an environment where Wi-Fi signals are obstructed.
•Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices,
and other devices that operate on the 2.4 GHz band.
•Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
•Check the connected device to make sure it is not experiencing errors.
Sendingfailed
Memorycarderror
•If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk.
C OPY
 previous next