Canon MARK IV Digital Camera User Manual


 
213
3 Custom Function Settings
C.Fn I -16 AE Microadjustment
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
correct exposure from being achieved.
You can fine adjust the camera’s standard exposure level. The adjustment
can help if the camera’s “standard exposure” always seems to be
underexposed or overexposed.
With setting 1 selected, press the <B> button to display the adjustment
screen.
0: Disable
1: Enable
The adjustment can be made up to ±1 stop
in 1/8-stop increments. If the image tends to
be underexposed, set the adjustment to the
+ side. Or to the - side if the image tends to
be overexposed.
C.Fn I -17 FE Microadjustment
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
the correct flash exposure from being obtained.
You can fine adjust the camera’s standard flash exposure level. The
adjustment can help if the camera’s “standard flash exposure” (without
flash exposure compensation) always seems to be underexpose or
overexpose the subject.
With setting 1 selected, press the <B> button to display the adjustment
screen.
0: Disable
1: Enable
The adjustment can be made up to ±1 stop
in 1/8-stop increments. If the subject tends
to be underexposed, set the adjustment to
the + side. Or to the - side if the subject
tends to be overexposed.
COPY