Filter
Top Products
177
Appendix
The subject is out
of focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The flash does not
fire.
1)If
?
(Flash Off) is selected as the flash mode, change to
another mode (page 46).
2)If battery power is low, replace the batteries with a full set of
new ones.
3)If a BEST SHOT scene that uses
?
(Flash Off) is selected,
change to a different flash mode (page 46) or select a
different BEST SHOT scene (page 73).
Camera powers
down during Self-
timer countdown.
The batteries may be dead.
The monitor screen
image is out of
focus.
1)You may be using Manual Focus and have not focused the
image. Focus the image (page 52).
2)You may be using
´
(Macro) or Á (Super Macro) for
scenery or portraits. Use Auto Focus for scenery and portrait
shots (page 52).
3)You may be trying to use Auto Focus when shooting a close-
up shot. Use the
´
(Macro) or Á (Super Macro) for close
ups (page 52).
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)You may be attempting to shoot in a dark location with
?
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
46) or use lights for illumination.
3)Lighting (page 102) may be enabled for snapshots, which can
cause an increase in digital noise. Use a light or some other
means to illuminate the subject.
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows , replace
batteries (alkaline) or charge batteries (Ni-MH) as soon as
possible.
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Problem Possible Cause and Recommended Action